Products
Self-Lubricated Bearings
-
MU
- PTFE Modified
- Sintered bronze
- Low carbon steel
-
MR-1
- PTFE Modified
- Bronze
- PTFE Modified
-
MR-5
- PTFE Modified
- Low carbon steel
- Sn or Zn protective layer
-
MR-5 AL
- PTFE Modified
- Aluminium alloy (AlMg3)
- Sn or Zn protective layer
-
MR-5 ALC
- PTFE Modified
- Aluminium cladded steel
- Sn or Zn protective layer
-
MR-5 316
- PTFE Modified
- Stainless steel
- Sn or Zn protective layer
-
ML-1
- PTFE impregnated Bronze mesh
- Low carbon steel
- Sn or Zn protective layer
-
ML-2
- PTFE impregnated Stainless steel AISI 316L mesh
- Stainless steel AISI 316L
- Sn or Zn protective layer
-
MR-2
- PTFE Modified
- Bronze
- PTFE Modified
-
MU-B
- PTFE Modified
- Sintered Bronze
- Bronze
-
MU-316
- PTFE Modified
- Sintered bronze
- Stainless Steel
-
MR-3
- PTFE Modified
- Bronze
- PTFE Modified
-
MU-J
- PTFE antifriction layer
- Sintered bronze
- Low carbon steel
-
Fritex-B
- PTFE Fabric
- Special Adhesive 60μm
- Bronze
-
HT-625
- Special Surface Treatment “Duritex ML”
- Inconel 625
-
Sintered Bronze
- Sintered Bronze
-
TWM
- PTFE Fibres
- Glass Fibres
- Epoxy Resin
Pre-lubricated Bearings
-
MX
- Pom-C layer 0,25 ÷ 0,50 mm thickness
- Porous bronze layer 0,20 ÷ 0,35 mm thickness
- Low carbon steel supporting strip 0,50 to 2,70 mm thick depending on the size of the bush. The steel is plated for corrosion protection (Tin or Zinc 2÷8 μm).
-
MX-H
- Pom-C layer 0,25 ÷ 0,50 mm thickness
- Porous bronze layer 0,20 ÷ 0,35 mm thickness
- Low carbon steel supporting strip 0,50 to 2,70 mm thick depending on the size of the bush. The steel is plated for corrosion protection (Tin or Zinc 2÷8 μm).
-
BRM-10/80
Bronze
-
BMT
- Bronze
- Low Carbon Steel
