Characteristics

Thick sliding layer with uniformly distributed solid lubricants
Good calibration/sizing assembly (zero-clearance)
High surface conductivity with E version PTFE, not-conductive D version PTFE available with notches/dimples, to prevent paint bridge issues, 1Ω volume conductance can be achieved with proper surface contact
With right fit, uniform torque can be achieved at the required value
Thick PTFE layer helps in edge loading

Maximum Specific Load Static	60-200 N/mm² (8700-29000 psi)
Maximum Specific Load Dynamic	45-120 N/mm² (6540-17400 psi)
Service Temperature Minimum	-200°C (-328°F)
Service Temperature Maximum	+180°C (+356°F)
Service Temperature Intermittent	+260°C (+500°F)
Maximum Speed Dry	1.5 m/s (300 fpm)
Coefficient of Friction Dry	0.06 - 0.3
Maximum Dry Load Factor Continuous	1.8 N/mm² · m/s
Surface Resistivity E version PTFE	~10⁵Ω
Surface Resistivity D version PTFE	~10¹⁴Ω